Description
The UltraTec PD1+ is a small, lightweight, high sensitivity pocket Doppler with built in fetal heart rate processing. The 2MHz fetal Doppler probe is ideal for use by a General Practitioner or Midwife for routine antenatal fetal detection.
Fetal Heart Rate information is also displayed on a large LCD display with the audio signal available to the user via the built in loudspeaker or optional headset with output level controlled by rotary volume control. Fetal Heart Rate traces are available by connection of the serial output to the optional UltraTrace 2 PC compatible software.
Features
- The UltraTec PD1+ extends the standard features of the PD1, while still providing a small and lightweight device
- Built-in Foetal Heart Rate processing software (FHR)
- FHR information is displayed on the large LCD display for monitoring along with audio foetal heart signals
- FHR traces can be reproduced by connecting the built-in serial output to the optional UltraTrace 2 PC connection software
- Microprocessor controlled battery saver system
- 9v battery gives in excess of 6 hours continuous use
- Unit supplied with gel, battery, soft carry case and operating instructions
- 3 year warranty
- Made in the UK
Specifications
| Frequency | 2MHz continuous wave |
|
Probe |
2 crystal narrow beam |
| Audio | Response 300Hz to 1KHz ( 4KHz with vascular) |
| Range | 50 to 210 bpm |
| Power output |
<15m W/cm2 SATA |
| Indicators | 3 digit FHR LCD display, FHR pulse icon, battery low icon |
| Heart Rate Processing | Digital multipoint autocorrelator |
| Control | Rotary volume control and power on/of button |
| Headset | Optional |
| Serial (PD1+ range) | RS232 interface to optional UltraTrace 2 PC software |
| Battery | MN1604 (PP3) 9V Alkaline Manganese |
| Weight | 295g typically, including probe |
| Size | 150mm x 75mm |
