Alcometer aka Breathalyser Lion 500 Kit is used to measure level of alcohol in the breath of an individual. It is a fully quantitative and accurate and portable breath analysis that can be used literally anywhere. Lion 500 uses the Lion fuel cell sensor, so the reading is very unlikely to be affected by anything in the subject's breath other than alcohol. It is fully automatic through microprocessor control, so very simple to use as well.
A quality product that is used extensively by Police Forces around the world for screening and evidential testing and is Type Approved by the Home Office, Great Britain for UK Police use in the United Kingdom.
Due to the accurate results, versatile design and ease of use it is used not just by the UK Police but also employers all over the world across various industries like Marine and Shipping Industry, Building and Construction Industry, Transportation - Air/Rail/Road, Energy Mining and Infrastructure, as well as NHS Hospitals, De-Addiction/Substance Misuse Centres, Local Councils, Education sector etc.
Now supplied as a kit including all you need to get started, in one bundle + 250 mouthpieces Free !
To ensure accuracy of the results, Lion 500 alcometer's calibration should be checked periodically using known alcohol standard gas canister. These contain compressed air mixed with alcohol vapour in a known concentration and available in 2 options - Short Shelf Life and Long Shelf Life. As a guide, depending on the usage a recalibration should not be required before every 6 months. Both these canisters are expiry prone products so to ensure longest expiry you need not purchase the alcohol standard before you actually require them. When required, we can supply these - Please email/call us or look for product codes FS281 and FS280 on our website.
Optional Accessories like Carry Pouch and Printer Kit etc. also available to be ordered separately.
Alcohol Sensor: Lion fuel cell micro version
Specificity: Unaffected by all other likely breath contaminants
Measuring Range: 0.02 to 2.00mg/L BrAC, or equivalent in other units
Warm-up Time: There is no heater, so no warm-up time
Response Time: Typically 4s at 0.00mg/L; within 10s if alcohol is present
Recovery Time: Typically 5s at 0.00mg/L; within 30s up to 0.50mg/L, and within 60s between 0.50 and 2.00mg/L
Operating Temperature Range: -5 to 45°C, +10 to +40°C, for optimum operation
Power Supply: 2 x AA cells give at least 750 breath tests
Calibration Checking: Recommended once every two months
Calibration Adjustment: Should not be required more than once a year
Calibration Standard: Either a dry-gas or a wet-vapour simulator
Dimensions: 125 x 65 x 30mm
Weight: Approximately 140g, with batteries
Warranty: One year, parts and labour
* Picture shown is an Indicative picture only and not the actual product. Contents provided will be as per the contents listed.
12 Months Manufacturer Warranty